High Detail Large Industrial 3d Printer / Laser Resin 3d Printer 10.0 M/S Scanning Speed

SPECIFICATIONS OF KINGS-7255 INDUSTRIAL SLA 3D LASER PRINTER

Basic information

Construction Size: 720mm(X)×550mm(Y)×400mm(Z)

Equipment Size (without display): 125cm(W)×116cm(D)×200cm(H)

Equipment Weight:about 1200kg

Rated Dissipation: 1.5KVA

LASER SYSTEM

Laser Type:Nd: YV04 Solid Laser

Wave Length: 355nm

Power: Minimum Power to Liquid Level≥300mW

COATING SYSTEM

Coating ModeIntelligent Position Vacuum Recoating

Normal Layered Thickness: 0.1mm

Rapid Build Layered Thickness: 0.15mm

Precise Build Layered Thickness: 0.05mm

Special Build Layered Thickness: 0.05mm~0.20mm

OPTICAL & SCANNING SYSTEM

Light Spot(diameter @1/e2): 0.10-0.15mm

Scanning Mode: Germanic Galvanometer Scanner

Parts Scanning Speed: Maximum 10.0m/s

ELEVATOR SYSTEM

Vertical Resolution Ratio: 0.0005mm

Repeat Positioning Accuracy: ±0.01mm

RESIN TANK

First Tank Weight: about 270kg

Forming Material: Photosensitive Resin

Resin Heating Method: Bottom Heating with Silicone Rubber

CONTROL SOFTWARE

Machine Control Software: KING3D Control Software

Device Software Interface: 3D Design Software, STL File Format

SOFTWARE SYSTEM

Master Controller Operation System: Windows 7

Network Type and Protocol: Ethernet,TCP/IP

INSTALLATION CONDITION

Current Source: 200-240VAC 50/60Hz, Single Phase,10A

Ambient Temperature: 20-26ºC

Relative Humidity: ＜40%,Frost Free Knot